1. Complete head incl. cams, cam keepers, cam bore plug, tacho drive adapter, pulleys, followers, valves, springs, spring seats, caps, retainers, shims. Needs only stem seals, valve lapping and final assembly.
2. Seasoned Kent block; bore is 3.215+/-. Needs bored to fit larger piston set included below. Deburred, then stored 20 years. All plugs removed for final cleaning.
3. 4 Cosworth 3.188" pistons w/4 Cosworth conrods, 4 Cosworth 3.280" pistons, 2 usable rods
4. 5 port side-mount pump with all fittings and pick-up tube. Checked and cleaned.
5. Gearbox adapter x 1.125" thick. Marked "Hewland"
6. Lucas electronic spark box with dist., old cap, rotor, wires.
7. Modern gear drive starter with adjustable clocking ring. 9 tooth drive.
8. Cast alloy timing cover (repaired, may be usable)
9. Belt drive tensioner, upper idler with some damage (gear teeth marks on side guides)
10. Crank belt drive (repaired may be usable)
11. Steel dry sump pan
12. Alloy water pump with drive
13. Intake manifolds
We've been saving all this stuff in the hopes that a chassis would make it into our lives we could use the beginnings to this engine on. Things change and life takes turns...
Would like to sell everything as a package only.
$4500 + shipping from 83860. Should fit into 3 or 4 boxes and go UPS.
Pictures coming.
2. Seasoned Kent block; bore is 3.215+/-. Needs bored to fit larger piston set included below. Deburred, then stored 20 years. All plugs removed for final cleaning.
3. 4 Cosworth 3.188" pistons w/4 Cosworth conrods, 4 Cosworth 3.280" pistons, 2 usable rods
4. 5 port side-mount pump with all fittings and pick-up tube. Checked and cleaned.
5. Gearbox adapter x 1.125" thick. Marked "Hewland"
6. Lucas electronic spark box with dist., old cap, rotor, wires.
7. Modern gear drive starter with adjustable clocking ring. 9 tooth drive.
8. Cast alloy timing cover (repaired, may be usable)
9. Belt drive tensioner, upper idler with some damage (gear teeth marks on side guides)
10. Crank belt drive (repaired may be usable)
11. Steel dry sump pan
12. Alloy water pump with drive
13. Intake manifolds
We've been saving all this stuff in the hopes that a chassis would make it into our lives we could use the beginnings to this engine on. Things change and life takes turns...
Would like to sell everything as a package only.
$4500 + shipping from 83860. Should fit into 3 or 4 boxes and go UPS.
Pictures coming.
Most of a BDA engine
Aucun commentaire:
Enregistrer un commentaire